D-Link DGS-3620-52P CLI Guide - Page 88
Format, Parameters
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config access_profile [profile_id | profile_name ] [add access_id [auto_assign | ] [ethernet {[vlan | vlan_id ] {mask } | source_mac {mask } | destination_mac {mask } | 802.1p | ethernet_type }(1) | ip {[vlan | vlan_id ] {mask } | source_ip {mask } | destination_ip {mask } | dscp | [icmp {type | code } | igmp {type } | tcp {src_port {mask } | dst_port {mask } | flag [all | {urg | ack | psh | rst | syn | fin}]} | udp {src_port {mask } | dst_port {mask }} | protocol_id {user_define {mask }}]}(1) | packet_content {offset_chunk_1 {mask } | offset_chunk_2 {mask } | offset_chunk_3 {mask } | offset_chunk_4 {mask }}(1) | ipv6 {class | flowlabel | source_ipv6 {mask } | destination_ipv6 {mask } | [tcp {src_port {mask } | dst_port {mask }} | udp {src_port {mask } | dst_port {mask }} | icmp {type | code }]}(1)] [port [ | all] | vlan_based [vlan | vlan_id ]] [permit {priority {replace_priority} | [replace_dscp_with | replace_tos_precedence_with ] | counter [enable | disable]} | mirror {group_id } | deny] {time_range } | delete access_id ] Parameters profile_id - Specify the index of the access list profile. - Specify the value between 1 and 6. profile_name - Specify the profile name. - Specify the profile name. The maximum length is 32 characters. add access_id - Specify the index of the access list entry. The lower the access ID, the higher the priority. auto_assign - Specify to automatically assign the access ID. - Specify a value between 1 and 256. ethernet - Specify an Ethernet access control list rule. vlan - Specify the VLAN name. -Specify the VLAN name. The maximum length is 32 characters. vlanid - Specify the VLAN ID. - Specify the VLAN ID between 1 and 4094. mask - (Optional) Specify the mask. - Specify the mask. source_mac - Specify the source MAC address. - Specify the source MAC address. mask - (Optional) Specify the mask. - Specify the mask. destination_mac - Specify the destination MAC address. - Specify the destination MAC address. mask - (Optional) Specify the mask. - Specify the mask. 802.1p - Specify the value of the 802.1p priority tag. - Specify the value of the 802.1p priority tag. The priority tag ranges from 1 to 7. ethernet_type - Specify the Ethernet type. - Specify the Ethernet type. 83