D-Link DGS-3620-52P CLI Guide - Page 571
create jwac user, config jwac user
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 571 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin# 47-19 create jwac user Description This command creates JWAC users in the local database. When "local" is chosen while configuring the JWAC RADIUS protocol, the local database will be used. Format create jwac user {vlan } Parameters - Specify the user name to be created. vlan - (Optional) Specify the target VLAN ID for the authenticated host which uses this user account to pass authentication. - Specify the target VLAN ID for the authenticated host which uses this user account to pass authentication. The VLAN ID value must be between 1 and 4094. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To create a JWAC user in the local DB: DGS-3620-28SC:admin# create jwac user 112233 Command: create jwac user 112233 Enter a case-sensitive new password:*** Enter the new password again for confirmation:*** Success. DGS-3620-28SC:admin# 47-20 config jwac user Description This command configures a JWAC user. Format config jwac user {vlan } Parameters - Specify the user name to be configured. vlan - (Optional) Specify the target VLAN ID for the authenticated host which uses this user 566