D-Link DGS-3620-52P CLI Guide - Page 217
CFM Commands
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 15 CFM Commands create cfm md {md_index } level config cfm md [ | md_index ] {mip [none | auto | explicit] | sender_id [none | chassis | manage | chassis_manage]}(1) create cfm ma {ma_index } md [ | md_index ] config cfm ma [ | ma_index ] md [ | md_index ] {vlanid | mip [none | auto | explicit | defer] | sender_id [none | chassis | manage | chassis_manage | defer] | ccm_interval [3.3ms | 10ms | 100ms | 1sec | 10sec | 1min | 10min] | mepid_list [add | delete] | mode [software | hardware]}(1) create cfm mep mepid md [ | md_index ] ma [ | ma_index ] direction [inward | outward] port config cfm mep [mepname | mepid md [ | md_index ] ma [ | ma_index ]] {state [enable | disable] | ccm [enable | disable] | pdu_priority | fault_alarm [all | mac_status | remote_ccm | error_ccm | xcon_ccm | none] | alarm_time | alarm_reset_time }(1) delete cfm mep [mepname | mepid md [ | md_index ] ma [ | ma_index ]] delete cfm ma [ | ma_index ] md [ | md_index ] delete cfm md [ | md_index ] enable cfm disable cfm config cfm ports state [enable | disable] show cfm ports show cfm {[md [ | md_index ] {ma [ | ma_index ] {mepid }} | mepname ]} show cfm fault {md [ | md_index ] {ma [ | ma_index ]}} show cfm port {level | direction [inward | outward] | vlanid } cfm lock md [ | md_index ] ma [ | ma_index ] mepid remote_mepid action [start | stop] cfm loopback [mepname | mepid md [ | md_index ] ma [ | ma_index ]] {num | [length | pattern ] | pdu_priority } cfm linktrace [mepname | mepid md [ | md_index ] ma [ | ma_index ]] {ttl | pdu_priority } show cfm linktrace [mepname | mepid md [ | md_index ] ma [ | ma_index ]] {trans_id } delete cfm linktrace {[md [ | md_index ] {ma [ | ma_index ] {mepid }} | mepname ]} config cfm mp_ltr_all [enable | disable] show cfm mipccm show cfm mp_ltr_all show cfm pkt_cnt {[ports {[rx | tx]} | [rx | tx] | ccm]} clear cfm pkt_cnt {[ports {[rx | tx]} | [rx | tx] | ccm]} show cfm remote_mep [mepname | md [ | md_index ] ma [ | ma_index ] mepid ] remote_mepid config cfm ais md [ | md_index ] ma [ | ma_index 212