D-Link DGS-3620-52P CLI Guide - Page 428
FDB Commands
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 428 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 33 FDB Commands create fdb [port | drop] create fdb vlanid [port | drop] create multicast_fdb config multicast_fdb [add | delete] config fdb aging_time config multicast vlan_filtering_mode [vlanid | vlan | all] [forward_all_groups | forward_unregistered_groups | filter_unregistered_groups] delete fdb clear fdb [vlan | port | all] show multicast_fdb {[vlan | vlanid ] | mac_address } show fdb {[port | vlan | vlanid | mac_address | static | aging_time | security]} show multicast vlan_filtering_mode {[vlanid | vlan ]} 33-1 create fdb Description This command is used to make an entry into the switch's unicast MAC address forwarding database. Format create fdb [port | drop] Parameters - Specify a VLAN name associated with a MAC address. The maximum length is 32 characters. - Specify the MAC address to be added to the static forwarding table. port - The switch will always forward traffic to the specified device through this port. - Specify the port number corresponding to the MAC destination address. drop - Specify to have the switch drop traffic. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To create an unicast MAC forwarding: DGS-3620-28SC:admin#create fdb default 00-00-00-00-01-02 port 1:5 Command: create fdb default 00-00-00-00-01-02 port 1:5 Success. DGS-3620-28SC:admin# 423