D-Link DGS-3620-52P CLI Guide - Page 830

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Example To disable PIM-SM for IPv6 network: DGS-3620-28SC:admin# disable pim6 Command: disable pim6 Success. DGS-3620-28SC:admin# 74-10 config pim6 last_hop_spt_switchover Description This command is used on the last hop router to decide whether to receive the multicast data from the shared tree or switch over to the shortest path tree. Format config pim6 last_hop_spt_switchover [never | immediately] Parameters last_hop_spt_switchover - Specifies the SPT switchover mode on the last-hop switch. never - Specifies that the mode will never switch to SPT. This is the default value. immediately - Specifies that the mode will immediately switch to SPT. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) Example To set the SPT-switchover mode to never: DGS-3620-28SC:admin# config pim6 last_hop_spt_switchover never Command: config pim6 last_hop_spt_switchover never Success. DGS-3620-28SC:admin# 74-11 show pim6 neighbor Description This command is used to list all neighbors learned by the PIM6 on the switch. Format show pim6 neighbor {ipif } 825