D-Link DIR-505L User Manual - Page 52
Manual Configuration, Wireless Settings, Router Mode
View all D-Link DIR-505L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Section 4 - Security Manual Configuration Wireless Settings Router Mode Wireless When you are browsing for available wireless networks, this Network Name: is the name that will appear in the list (unless Visibility Status is set to Invisible, see below). This name is also referred to as the SSID. For security purposes, it is highly recommended to change from the default network name. 802.11 Mode: Select one of the following: 802.11b Only - Select if you are only using 802.11b wireless clients. 802.11g Only - Select if you are only using 802.11g wireless clients. 802.11n Only - Select if you are only using 802.11n wireless clients. Mixed 802.11g and 802.11b - Select if you are using a mix of 802.11g and 11b wireless clients. Mixed 802.11n and 802.11g - Select if you are using a mix of 802.11n and 11g wireless clients. Mixed 802.11n, 802.11g and 802.11b - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients. Enable Auto The Auto Channel Scan setting can be selected to allow the DIR-505L to choose the channel with the least amount of Channel Scan: interference. Wireless Indicates the channel setting for the DIR-505L. The channel can be changed to fit the channel setting for an existing wireless Channel: network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out. D-Link DIR-505L User Manual 46