D-Link DIR-505L User Manual - Page 89

Section 3 - Configuration Setup Wireless Setup Wireless Network Service Set Identifier (SSID) is the name of your wireless network. Name: Create a name using up to 32 characters. The SSID is casesensitive. Wireless Mode: Select one of the following: 802.11g Only - Select if all of your wireless clients are 802.11g. 802.11n Only - Select only if all of your wireless clients are 802.11n. Mixed 802.11n and 802.11g - Select if you are using a mix of 802.11n and 11g wireless clients. Enable Auto The Auto Channel Scan setting can be selected to allow the Channel Scan: DIR-505L to choose the channel with the least amount of interference. Wireless Indicates the channel setting for the DIR-505L. By default the Channel: channel is set to 6.The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will be greyed out. Channel Width: Select the Channel Width: Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices. 20MHz - Select if you are not using any 802.11n wireless clients. 40MHz - Select if using only 802.11n wireless clients. Visibility Select Invisible if you do not want the SSID of your wireless Status: network to be broadcasted by the DIR-505L. If Invisible is selected, the SSID of the DIR-505L will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-505L. D-Link DIR-505L User Manual 83