D-Link DWR-512 User Manual - Page 49

Advanced Wireless - antenna

Get D-Link DWR-512 PDF manuals and user guides View all D-Link DWR-512 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Section 3 - Configuration Advanced Wireless Advanced Wireless contains settings which can negatively affect the performance of your router if configured improperly. Do not change these settings unless you are already familiar with them or have been instructed to make the change by one of our support personnel. After modifying any settings, click Save Settings to save your changes. Beacon Interval: Specify a value for the beacon interval. Beacons are packets sent by an Access Point to synchronize a wireless network. 100 is the default setting and is recommended. Transmit Power: Set the transmit power of the antennas. RTS Threshold: This value should remain at its default setting of 2347. If inconsistent data flow is a problem, only a minor modification should be made. Fragmentation: The fragmentation threshold, which is specified in bytes, determines whether packets will be fragmented. Packets exceeding the 2346 byte setting will be fragmented before transmission. 2346 is the default setting. DTIM Interval: Set the interval for DTIM. A Delivery Traffic Indication Message (DTIM) is a countdown informing clients of the next window for listening to broadcast and multicast messages. The default interval is 3. WMM Capable: WMM (Wi-Fi Multimedia) is a QoS (Quality of Service) system for your wireless network. Enable this option to improve the quality of video and voice applications for your wireless clients. TX Rates: Select the basic transfer rates based on the speed of wireless adapters on your wireless network. It is strongly recommended to keep this setting to Auto. D-Link DWR-512 User Manual 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
44
D-Link DWR-512 User Manual
Section 3 - Configuration
Specify a value for the beacon interval. Beacons are
packets sent by an Access Point to synchronize a wireless
network. 100 is the default setting and is recommended.
Set the transmit power of the antennas.
This value should remain at its default setting
of 2347. If inconsistent data flow is a problem,
only a minor modification should be made.
The fragmentation threshold, which is specified in bytes,
determines whether packets will be fragmented. Packets
exceeding the 2346 byte setting will be fragmented
before transmission. 2346 is the default setting.
Set the interval for DTIM. A Delivery Traffic Indication
Message (DTIM) is a countdown informing clients
of the next window for listening to broadcast and
multicast messages. The default interval is 3.
WMM (Wi-Fi Multimedia) is a QoS (Quality of
Service) system for your wireless network. Enable
this option to improve the quality of video and
voice applications for your wireless clients.
Select the basic transfer rates based on the speed
of wireless adapters on your wireless network. It is
strongly recommended to keep this setting to
Auto
.
Beacon Interval:
Transmit Power:
RTS Threshold:
Fragmentation:
DTIM Interval:
WMM Capable:
TX Rates:
Advanced Wireless
Advanced Wireless
contains settings which can negatively affect the performance of your router if configured improperly. Do not change
these settings unless you are already familiar with them or have been instructed to make the change by one of our support personnel.
After modifying any settings, click
Save Settings
to save your changes.