D-Link DWS-3250 Product Manual - Page 35

DXS/DWS 3200 Series User Guide Note The following screen is an example configuration.Items such as addresses, versions, and dates may differ for each device. Preparing to decompress... Decompressing SW from image-1 638000 OK Running from RAM... Running SW Ver. x.x.x.x Date 11-Jan-200x Time 15:43:13 HW version is Base Mac address is: 00:00:b0:24:11:80 Dram size is: xxM bytes Dram first block size is: 47104K bytes Dram first PTR is: 0x1200000 Flash size is: xM Devices on SMI BUS smi dev id = 16, dev type=0xd0411ab, dev revision=0x1 Device configuration: Prestera based - Back-to-back system Slot 1 - DB-DX240-24G HW Rev. xx.xx Tapi Version: xx.x.x-x Core Version: xx.x.x-x 01-Jan-200x 01:01:22 %INIT-I-InitCompleted: Initialization task is completed Console> 01-Jan-200x 01:01:23 %LINK-I-Up: e1 01-Jan-200x 01:01:23 %LINK-W-Down: e2 01-Jan-200x 01:01:23 %LINK-I-Up: Vlan 1 01-Jan-200x 01:01:23 %LINK-W-Down: e4 . . . 01-Jan-200x 01:01:23 %LINK-W-Down: e46 01-Jan-200x 01:01:23 %LINK-W-Down: e47 01-Jan-200x 01:01:23 %LINK-W-Down: e48 After the switch boots successfully, a system prompt appears (console>) and the local terminal can be used to begin configuring the switch. However, before configuring the switch, ensure that the software version installed on the device is the latest version. If it is not the latest version, download and install the latest version. See "Software Download and Reboot." Configuration Overview Before assigning a static IP address to the device, obtain the following information from the network administrator: • A specific IP address allocated by the network administrator for the switch to be configured • Network mask for the network There are two types of configuration: Initial configuration consists of configuration functions with basic security considerations, whereas advanced configuration includes dynamic IP configuration and more advanced security considerations. Page 34