D-Link DWS-3250 Product Manual - Page 84

Configuring Device Security Configuring Management Security - Telnet - Assigns Telnet access to the rule. If selected, users accessing the device using Telnet meeting access profile criteria are permitted or denied access to the device. - Secure Telnet (SSH) - Assigns SSH access to the rule. If selected, users accessing the device using Telnet meeting access profile criteria are permitted or denied access to the device. - HTTP - Assigns HTTP access to the rule. If selected, users accessing the device using HTTP meeting access profile criteria are permitted or denied access to the device. - Secure HTTP (HTTPS) - Assigns HTTPS access to the rule. If selected, users accessing the device using HTTPS meeting access profile criteria are permitted or denied access to the device. - SNMP - Assigns SNMP access to the rule. If selected, users accessing the device using SNMP meeting access profile criteria are permitted or denied access to the device. • Source IP Address - Defines the interface source IP address to which the rule applies. • Prefix Length - Defines the number of bits that comprise the source IP address prefix, or the network mask of the source IP address. • Action -Defines the action attached to the rule. The possible field values are: - Permit - Permits access to the device. - Deny - Denies access to the device. This is the default. • Remove - Removes rules from the selected access profiles. The possible field values are: - Checked - Removes the selected rule from the access profile. - Unchecked - Maintains the rules attached to the access profile. 2. Click . The Add Profile Rule Page opens: Figure 38: Add Profile Rule Page 3. Define the Access Profile Name, Priority, Management Method, Interface, Source IP Address, Network Mask or Prefix Length, and Action fields. 4. Click . The profile rule is added to the access profile, and the device is updated. Page 83