Dell Alienware Area-51 Threadripper Edition R7 Service Manual - Page 100
Removing the handle bars, Prerequisites, Procedure
View all Dell Alienware Area-51 Threadripper Edition R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Removing the handle bars WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the stability foot. 2 Remove the left and right side-panels. See "Removing the side panels". Procedure 1 Remove the seven screws (#6-32x6.5) that secure the rear handle-bar to the left side of the chassis. 2 Remove the seven screws (#6-32x6.5) that secure the rear handle-bar to the right side of the chassis. 100
Removing the handle bars
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
Before working inside your computer
. After working inside your computer, follow the instructions
in
After working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
Prerequisites
1
Remove the
stability foot
.
2
Remove the left and right side-panels. See “
Removing the side panels
”.
Procedure
1
Remove the seven screws (#6-32x6.5) that secure the rear handle-bar to the left side of the chassis.
2
Remove the seven screws (#6-32x6.5) that secure the rear handle-bar to the right side of the chassis.
100