Dell Alienware Area-51 Threadripper Edition R7 Service Manual - Page 80
Removing the front-bezel heat sensor cable, Prerequisites, Procedure
View all Dell Alienware Area-51 Threadripper Edition R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Removing the front-bezel heat sensor cable WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the stability foot. 2 Remove the left and right side-panels. See "Removing the side panels". 3 Remove the PCI fan. Procedure 1 Disconnect the front-bezel heat sensor cable from the system board. 2 Remove the front-bezel heat sensor cable from the routing guides on the chassis. 3 Remove the two screws (M3x5.25) that secure the PCI fan holder to the chassis. 4 Slide and remove the PCI fan holder from the chassis. 80