Dell Alienware Area-51 Threadripper Edition R7 Service Manual - Page 126
Replacing the bottom tron-lighting cable, Procedure, Post-requisites
View all Dell Alienware Area-51 Threadripper Edition R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Replacing the bottom tron-lighting cable WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Route the bottom tron-lighting cables through the slot on the chassis. 2 Route the bottom tron-lighting cables through the routing guide on the chassis. 3 Secure the bottom tron-lighting cables to the chassis using the securing clip. 4 Connect the bottom tron-lighting cables to the logo board. Post-requisites 1 Replace the base panel. 2 Replace the rear bezel. 3 Replace the front bezel. 4 Replace the handle bars. 5 Replace the PCI fan. 6 Replace the top fan. 7 Replace the left and right side-panels. See "Replacing the side panels". 8 Replace the stability foot. 126