Dell Alienware Area-51 Threadripper Edition R7 Service Manual - Page 94
Replacing the power-supply unit, Procedure
View all Dell Alienware Area-51 Threadripper Edition R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Replacing the power-supply unit WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure WARNING: The cables and ports on the back of the power-supply unit are color-coded to indicate the different power wattage. Ensure that you plug in the cable to the correct port. Failure to do so may result in damaging the power-supply unit and/or system components. 1 Align and place the metal bracket on to the power-supply unit. 2 Replace the four screws (#6-32x6) that secure the metal bracket to the power-supply unit. 3 Press and hold the securing tab on the chassis and slide the power-supply unit into the chassis until it snaps into position. 94