Dell Alienware Area-51 Threadripper Edition R7 Service Manual - Page 70
Removing the top fan, Prerequisites, Procedure
View all Dell Alienware Area-51 Threadripper Edition R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Removing the top fan WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the stability foot. 2 Remove the left and right side-panels. See "Removing the side panels". Procedure 1 Lay the chassis on the right side. 2 Disconnect the top-fan cable from the connector on the system board. For more information on the top-fan cable connector, see "system-board components". 3 Remove the screw (#6-32x6) that secures the top fan on the chassis. 4 Pull the release tab away from the chassis, move the top fan towards the right side and slide the top fan out of the chassis. 70