Dell Alienware Area-51 Threadripper Edition R7 Service Manual - Page 24
Removing the stability foot, Procedure
View all Dell Alienware Area-51 Threadripper Edition R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Removing the stability foot WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Tilt the computer towards the front until the base is facing up. 2 Remove the two screws (#6-32x6) that secure the stability foot to the computer. 3 Lift the stability foot off the computer. 24
Removing the stability foot
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
Before working inside your computer
. After working inside your computer, follow the instructions
in
After working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
Procedure
1
Tilt the computer towards the front until the base is facing up.
2
Remove the two screws (#6-32x6) that secure the stability foot to the computer.
3
Lift the stability foot off the computer.
24