Dell Alienware Area-51 Threadripper Edition R7 Service Manual - Page 77
Replacing the solid-state drive, Procedure, Post-requisites
View all Dell Alienware Area-51 Threadripper Edition R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Replacing the solid-state drive WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive. Procedure 1 Locate the solid-state drive slot on the system board. 2 Align the notch on the solid-state drive with the tab on the solid-state drive slot and slide the solid-state drive into the solid-state drive slot. 3 Align the screw hole on the solid-state drive with the screw hole on the system board. 4 Replace the screw (M2x2.5) that secures the solid-state drive to the system board. Post-requisites 1 Replace the left and right side-panels. See "Replacing the side panels". 2 Replace the stability foot. 77