Dell Alienware Area-51 Threadripper Edition R7 Service Manual - Page 95
Align the notch on the power-supply unit cover with the tab on the chassis.
View all Dell Alienware Area-51 Threadripper Edition R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
4 Align the notch on the power-supply unit cover with the tab on the chassis. 5 Replace the four screws (#6-32x6) that secure the power-supply unit to the bezel. 6 Connect the power cable to the power-supply unit. Post-requisites 1 Replace the graphics cards or multiple graphics cards. 2 Replace the left and right side-panels. See "Replacing the side panels". 3 Replace the stability foot. 95
4
Align the notch on the power-supply unit cover with the tab on the chassis.
5
Replace the four screws (#6-32x6) that secure the power-supply unit to the bezel.
6
Connect the power cable to the power-supply unit.
Post-requisites
1
Replace the
graphics cards
or
multiple graphics cards
.
2
Replace the left and right side-panels. See “
Replacing the side panels
”.
3
Replace the
stability foot
.
95