Dell Alienware Area-51 Threadripper Edition R7 Service Manual - Page 54
Replacing the drive-bay heat sensor cable, Procedure
View all Dell Alienware Area-51 Threadripper Edition R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Replacing the drive-bay heat sensor cable WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Route the drive-bay heat-sensor cable through the slot on the chassis. 2 Align the tab on the drive-bay heat-sensor cable on the chassis. 3 Push the release tab on the drive-bay heat-sensor cable and press it into place. 4 Lay the chassis on the left side. 54
Replacing the drive-bay heat sensor cable
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
Before working inside your computer
. After working inside your computer, follow the instructions
in
After working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
Procedure
1
Route the drive-bay heat-sensor cable through the slot on the chassis.
2
Align the tab on the drive-bay heat-sensor cable on the chassis.
3
Push the release tab on the drive-bay heat-sensor cable and press it into place.
4
Lay the chassis on the left side.
54