Dell Alienware Area-51 Threadripper Edition R7 Service Manual - Page 48
Replacing the left AlienFX side-panel connector, Procedure
View all Dell Alienware Area-51 Threadripper Edition R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Replacing the left AlienFX side-panel connector WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Route the cable through the slot on the bracket and align the screw holes on the left AlienFX side-panel connector with the screw holes on the bracket. 2 Replace the two screws (#6-32x6) that secure the AlienFX side-panel connector to the bracket. 3 Align the screw hole on the left AlienFX side-panel connector with the screw hole on the chassis. 4 Replace the screw (#6-32x6) that secures the left AlienFX side-panel connector to the chassis. 5 Route the AlienFX side-panel cable through the routing guides on the chassis 6 Turn the chassis over. 7 Route the cable through the securing clip and through the slot on the chassis. 48