Dell Alienware Area-51 Threadripper Edition R7 Service Manual - Page 104
Replacing the handle bars, Procedure
View all Dell Alienware Area-51 Threadripper Edition R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Replacing the handle bars WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Align and place the bottom-handle bar on the slot and snap the bottom-handle bar to the chassis. 2 Replace the seven screws (#6-32x6.5) that secure the bottom-handle bar to the left side of the chassis. 104
Replacing the handle bars
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
Before working inside your computer
. After working inside your computer, follow the instructions
in
After working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
Procedure
1
Align and place the bottom-handle bar on the slot and snap the bottom-handle bar to the chassis.
2
Replace the seven screws (#6-32x6.5) that secure the bottom-handle bar to the left side of the chassis.
104