Dell Alienware Area-51 Threadripper Edition R7 Service Manual - Page 88

Removing the processor, Prerequisites, Procedure

Get Dell Alienware Area-51 Threadripper Edition R7 PDF manuals and user guides View all Dell Alienware Area-51 Threadripper Edition R7 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

Removing the processor WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the stability foot. 2 Remove the left and right side-panels. See "Removing the side panels". 3 Remove the processor liquid-cooling assembly. Procedure WARNING: The processor might still be hot after the computer is shut down. Allow the processor to cool down before removing it. 1 In the order as indicated on the processor shield (3,2,1), loosen the captive screws that secure the processor shield to the system board. 2 Open the processor shield. 3 Press down and push the left-release lever and right-release lever away from the processor cover to release it from the securing tab. 88

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
Removing the processor
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
Before working inside your computer
. After working inside your computer, follow the instructions
in
After working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
Prerequisites
1
Remove the
stability foot
.
2
Remove the left and right side-panels. See “
Removing the side panels
”.
3
Remove the
processor liquid-cooling assembly
.
Procedure
WARNING: The processor might still be hot after the computer is shut down. Allow the processor to cool down
before removing it.
1
In the order as indicated on the processor shield (3,2,1), loosen the captive screws that secure the processor shield to the
system board.
2
Open the processor shield.
3
Press down and push the left-release lever and right-release lever away from the processor cover to release it from the
securing tab.
88