Dell Inspiron 530 Owner's Manual - Page 135
Onboard, Devices, Integrated Audio, Enter system setup see System Setup on go
UPC - 883685981020
View all Dell Inspiron 530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
6 If you are removing the card permanently, install a filler bracket in the empty card-slot opening. NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer. 7 Replace the card retention bracket, ensuring that: • The guide clamp is aligned with the guide notch. • The tops of all cards and filler brackets are flush with the alignment bar. • The notch in the top of the card or filler bracket fits around the alignment guide. 8 Fix the card retention bracket by replacing and tightening the screw. NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer. 9 Replace the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on. 10 Remove the card's driver from the operating system. 11 If you removed a sound card: a Enter system setup (see "System Setup" on page 187), go to Onboard Devices and select Integrated Audio, and then change the setting to On. b Connect external audio devices to the audio connectors on the back panel of the computer. See "Back View of the Computer" on page 19. 12 If you removed an add-in network connector: a Enter system setup (see "System Setup" on page 187), go to Onboard Devices and select Integrated NIC, and then change the setting to On. b Connect the network cable to the integrated connector on the back panel of the computer. See "Back View of the Computer" on page 19 and "Back Panel Connectors" on page 22. Removing and Installing Parts 135