Dell Inspiron 530 Owner's Manual - Page 167
Installing the Processor Fan/Heat Sink Assembly
UPC - 883685981020
View all Dell Inspiron 530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Installing the Processor Fan/Heat Sink Assembly NOTICE: When reinstalling the fan, ensure that you do not pinch the wires that run between the system board and the fan. 1 Align the captive screws on the processor fan/heat sink assembly to the four metal screw hole projections on the system board. 1 1 processor fan/heat sink assembly NOTE: The processor fan/heat sink assembly in your computer may not look exactly like the one shown in the illustration above. 2 Tighten the four captive screws. NOTE: Ensure that the processor fan/heat sink assembly is correctly seated and secure. 3 Connect the processor fan/heat sink assembly cable to the CPU_FAN system board connector (see "Inside View of Your Computer" on page 109). 4 Replace the computer cover (see "Replacing the Computer Cover" on page 176). 5 Connect your computer and devices to an electrical outlet, and turn them on. Removing and Installing Parts 167