Dell Inspiron 530 Owner's Manual - Page 166
Removing the Processor Fan/Heat Sink Assembly
UPC - 883685981020
View all Dell Inspiron 530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Removing the Processor Fan/Heat Sink Assembly NOTICE: Do not touch the fan blades when you are removing the processor fan/heat sink assembly. This could damage the fan. 1 Follow the procedures in "Before You Begin" on page 105. 2 Remove the computer cover (see "Removing the Computer Cover" on page 107). 3 Disconnect the processor fan cable from the system board (see "Inside View of Your Computer" on page 109). 4 Carefully move away any cables that are routed over the processor fan/heat sink assembly. 5 Loosen the four captive screws securing the processor fan/heat sink assembly and lift it straight up. CAUTION: Despite having a plastic shield, the heat sink fan assembly may be very hot during normal operation. Be sure that it has had sufficient time to cool before you touch it. 1 1 processor fan/heat sink assembly NOTE: The processor fan/heat sink assembly in your computer may not look exactly like the one shown in the illustration above. 166 Removing and Installing Parts