Denon AVR 2807 Owners Manual - English - Page 61

Advanced Setup - Part 2 1 2 3 h Center Speaker Front Speaker Subwoofer Surround Speaker Surround back Speaker • Select "Large" or "Small" not according to the actual size of the speaker but according to the speaker's capacity for playing low frequency (bass sound below the frequency set for the Crossover Frequency) signals. If you do not know, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting. Setting the Subwoofer Setup Select the method of playback of the subwoofer for playing the low bass signals. 1 Press D H to select "Subwoofer Setup", then press ENTER. 2 Press F G to set. LFE: For any channel(s) that are set to "Large", low frequencies in that channel's corresponding source are directed to that loudspeaker only. The low frequencies played from the subwoofer are only the LFE signals and the low frequencies of channels set to "Small". LFE+Main: Low frequencies from speaker channels that have been set to "Large" are reproduced from those speakers as well as from the subwoofer(s). 3 Press ENTER. 1 2 Advanced Setup - Part 2 Setting the Distance This parameter is for optimizing the timing with which the audio signals are produced from the speakers and subwoofer according to the listening position. Preparations: Measure the distances between the listening position and the speakers (L1 to L8 on the diagram at the below). FL C FR SW SL L1 L3 L2 L4 Listening position L5 L6 L7 L8 SR SBL SBR 1 Press D H to select "Distance", then press ENTER. 2 Press F G to select "Meters" or "Feet". • The subwoofer mode setting is only valid when and "Yes" is set for the subwoofer in the "Setting the Speaker Configuration". • Select the "LFE+Main" mode if you want low frequency signals to always be played from the subwoofer channel. • Select the mode achieving a voluminous bass sound when playing music or movie sources. 57