Denon AVR-3311CI Owners Manual - English - Page 77

ENGLISH Audio/Video Adjust Setting items Panorama Assign front L/R signal also to surround channels for wider sound. Dimension Shift sound image center to front or rear to adjust playback balance. C.Width Assign center channel signal to front left and right channels for wider sound. Delay Time Adjust delay time to control sound stage size. Effect Lev. Adjust effect signal level. Room Size Determine size of acoustic environment. ON : Set. OFF : Do not set. 0 - 6 (3) Setting details 0 - 7 (3) 0ms - 300ms (30ms) 1 - 15 (10) Set to a lower level if the positioning and sense of phase of the surround signals seems unnatural. Small : Simulate acoustics of a small room. Medium-S : Simulate acoustics of a medium-small room. Medium : Simulate acoustics of a medium room. Medium-L : Simulate acoustics of a medium-large room. Large : Simulate acoustics of a large room. F.Height Determine whether to use front height channel. NOTE "Room Size" does not indicate the size of the room in which sources are played. ON : Audio is output from the front height speaker. OFF : Audio is not output from the front height speaker. NOTE • "F.Height" is displayed with the settings listed below. • When "Amp Assign" (vpage 79) is set to "Normal". • When the "Speaker Config." - "F.Height" setting (vpage 80) is set to other than "None". • "F.Height" cannot be set if the HD Audio source being played includes a front height channel. In this case, the Front height channel is played back without decoding in PLgz mode, using the input signal. Setting items Setting details Height Gain Low : Reduce the front height channel volume. Control the front height Mid : Front height channel sound is output with standard sound volume. channel volume. High : Increase the front height channel volume. AFDM (Auto flag detect mode) Detect the source's surround back channel signal and set the optimum surround mode automatically. NOTE "Height Gain" is displayed for the following settings. • When "Amp Assign" (vpage 79) is set to "Normal". • When the "Speaker Config." - "F.Height" setting (vpage 80) is set other than to "None". • When surround mode is "PLgz" or the PLgz decoder is used. ON : Set. OFF : Do not set. [Example] Playing Dolby Digital software (with EX flag) • When "AFDM" is set to "ON", the surround mode is automatically set to the DOLBY D + PLgx C mode. • To play in the DOLBY DIGITAL EX mode, set "AFDM" to "OFF" and "Surround Parameter" - "S.Back" to "MTRX ON". S.Back Sets the method of generating of the surround back channel. Some Dolby Digital EX sources do not include EX flags. If the playback mode does not switch automatically even when "AFDM" is set to "ON", set "Surround Parameter" - "S.Back" to "MTRX ON" or "PLgx C". nn For 2-channel sources ON : The surround back channel is used. OFF : No signal is played from the surround back channels. nn For multi-channel sources Set the decoding method for the surround back channel. DSCRT ON : Play the surround back signals included in the 7.1-channel source. MTRX ON : Generate and play the surround back signals from the surround channel signals. ES MTRXz1 : Generate and play the surround back signals from the surround channel signals of the DTS source. ES DSCRTz2 : Play the surround back signals included in the 6.1-channel DTS source. PLgx Cz3 : Generate and play the surround back signals by decoding the signals in the Dolby Pro Logic gx Cinema mode. PLgx M : Generate and play the surround back signals by decoding the signals in the Dolby Pro Logic gx Music mode. OFF : Do not play the surround back channel. z1 This can be selected when playing DTS sources. z2 This can be selected when playing DTS sources including a signal to identify discrete 6.1-channel signals. z3 This can be selected when "Speaker Config." - "S.Back" (vpage 80) is set to "2spkrs". 74 Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu