Denon AVR-3311CI Owners Manual - English - Page 96

Simple version Basic version Advanced version ENGLISH Operating the main remote control unit 9 Press the input source button on which the preset code is to be registered (DVD, BD, SAT/CBL, DVR, DOCK, V.AUX, GAME, CD or TV). • For TV, only the preset code for the categories "TV", "TV/DVD", or "TV/VCR" can be registered. • For "TV", "TV/DVD", or "TV/VCR" categories, only the preset code for TV can be registered. 10 Hold POWER ON and ZONE/DEVICE ON pressed simultaneously for more than 3 seconds. The zone mode indicator flashes twice. 11 Enter a five-digit code using 0 - 9. Press the buttons with an interval less than 10 seconds. MANUAL SETUP OPTION SETUP REMOTE PRESET CODES Category : DVD Brand : Denon Code [ 1/ 3] : 30490 Setup Remote 1. Press [INPUT SOURCE] button. 2. Press and hold 3sec. both [POWER ON] [DEVICE ON] button. 3. Input Code with [0-9] button. 4. Press any key to check device. (e.g. [DEVICE ON]) QUICK1 OK QUICK2 NG QUICK3 Return Press QUICK 1 if device works, QUICK 2 if not • When the code is registered. The zone mode indicator flashes twice. • When the code is not registered correctly The mode indicator slowly flashes once. Perform from step 9 again. • When an input number is not correct Press POWER ON once then perform the operations from step 9 again. 12 Operate the device being used to check the operation. • If the device is operating, press QUICK SELECT 1. Go to step 13. • If the device is not operating, press QUICK SELECT 2. Go to step 14. 13 The screen shown below is displayed, and registration of the preset code is completed. MANUAL SETUP OPTION SETUP REMOTE PRESET CODES Remote Preset Codes setup is finished. Press [AMP] button. And press [ENTER] button to return MENU. O K • The menu screen is retrieved. Press AMP then ENTER. 14 Either of the screens below is displayed. q MANUAL SETUP OPTION SETUP REMOTE PRESET CODES Selected code is not matched. Plesse try other codes. • The screen is displayed for 3 seconds, then the next preset registration screen is displayed automatically. w MANUAL SETUP OPTION SETUP REMOTE PRESET CODES Sorry, your remote is not supported. This function can not be used for your device. Press [AMP] button. And press [ENTER] button to return MENU. O K Some manufacturers use more than one type of remote control code. Preset codes to change the number and verify correct operation. NOTE Depending on the model and year of manufacture of your equipment, some buttons may not operate. GIf screen q is displayedH The device may be operating with the preset code displayed next. The preset registration screen is displayed. Repeat steps 9 to 12. GIf screen w is displayedH The device cannot be controlled with the remote control unit supplied with this unit. Use the remote control unit supplied with the device to be used. The menu screen is retrieved. Press AMP then ENTER. Information 93