Denon AVR-3311CI Owners Manual - English - Page 98

Simple version Basic version ENGLISH Operating the main remote control unit Specifying the zone used with the remote control unit When the ZONE SELECT button is pressed, only the set zone can be operated with the remote control unit. 1 Press and hold POWER ON and ZONE/DEVICE ON for at least 3 seconds. The zone mode indicator flashes twice. 2 Press ZONE SELECT. The zone mode indicator flashes twice. 3 Press 1 - 3 to set. The zone mode indicator flashes twice. [Settable items] 1 When only using "MAIN ZONE" 2 When using "MAIN ZONE" / "ZONE2" 3 When using "MAIN ZONE" / "ZONE2" / "ZONE3" (Default) Resetting the remote control unit Settings for the remote control unit are returned to the default values. 1 Press and hold POWER ON and ZONE/DEVICE ON for at least 3 seconds. The zone mode indicator flashes twice. 2 Press 9, 8 and 1, in that order. MAIN indicator flashes four times. All the settings are restored to their defaults. Operating the sub remote control unit • The sub remote control unit is equipped with frequently used buttons, so it can be used for simple remote control unit operations. • The sub remote control unit can also be used for multi-zone, so you can use it to control this unit from other rooms. • The operations listed below can be performed with the sub remote control unit. • Switching the input source • Adjusting the volume • SIRIUS, HD Radio and iPod operations • NET/USB direct play • Menu operations • Zone power on/off • It is not possible to operate devices other than the amplifier. NOTE This unit cannot be used in the ZONE4 mode. DIRECT PLAY button • Playback is possible in the mode selected at menu "Direct Play". FAVORITES Playback starts from the first track registered in the favorites. ALL MUSIC Playback starts from the first track registered in the "Music" folder. • When USB is pressed, playback starts from the first track on the USB memory device. NOTE When the media server is stopped or restarted, it may no longer be possible to play tracks stored in the favorites. Operating AV equipment Use this procedure to select the zone to be operated by the sub remote control unit. 1 Press ZONE SELECT to select a zone for operation. The zone mode indicator corresponding to the operating zone lights. • The mode switches each time ZONE SELECT is pressed. M Select for the operations in MAIN ZONE. Z2 Select for the operations in ZONE2. Z3 Select for the operations in ZONE3. Z4 Not used. 2 Press the input source select button. • The input source for the zone selected in step 1 is switched. • The operation mode of the remote control unit is switched as shown in the table. Input source select button Input source of this unit Devices controllable with the remote control unit (Operation mode) BD BD - DVD DVD - TV TV - SAT/CBL SAT/CBL - DVR DVR - GAME GAME - V.AUX V.AUX - CD CD - DOCK DOCK Control dock for iPod NET/ USB NET/USB • Network function • iPod or USB memory device connected to the USB port SAT TU SIRIUS SIRIUS Satellite Radio PHONO PHONO - TUNER, DTU HD Radio HD Radio receiver Advanced version Information 95