Denon AVR-3311CI Owners Manual - English - Page 87

ENGLISH Manual Setup Network Setup Make network settings. Setting items Network Connecting Make settings for wired LAN. Default settings are underlined. Setting details 1. Connect the LAN cable (vpage 22 "Connecting to a home network (LAN)"). 2. Turn on this unit (vpage 6 "Turn on power"). This unit performs automatic network setup due to the DHCP function. When connecting to a network that has no DHCP function, perform the setting in step 3. 3. Set the IP address at the "Network Connecting". MANUAL SETUP NETWORK SETUP NETWORK CONNECTING w MANUAL SETUP NETWORK SETUP NETWORK CONNECTING DHCP IP Address Exit Detail OFF 192.168.100.19 q DHCP IP Address Subnet Mask Default gateway Primary DNS Secondary DNS Proxy Exit OFF [192.168.000.001] [255.255.255.000] [000.000.000.000] [000.000.000.000] [000.000.000.000] r e ENTER Enter Make settings for wired LAN RETURN Return Set IP address manually RETURN Return q On the menu, select "Network Connecting" - "Detail" and press ENTER. w Use o p to set "DHCP" to "OFF", then press i. The DHCP function is disabled. e Use uip or 0 - 9 to input the address and press ENTER. • IP Address : Set the IP address within the ranges shown below. The Network Audio function cannot be used if other IP addresses are set. CLASS A: 10.0.0.0 - 10.255.255.255 CLASS B: 172.16.0.0 - 172.31.255.255 CLASS C: 192.168.0.0 - 192.168.255.255 • Subnet Mask : When connecting an xDSL modem or terminal adapter directly to this unit, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0. • Default Gateway : When connected to a gateway (router), input its IP address. • Primary DNS, Secondary DNS : If there is only one DNS address indicated in the documentation supplied by your provider, input it at "Primary DNS". If there are two or more DNS addresses, input the first one at "Secondary DNS". Setting items Network Connecting (Continued) Setting details r Use i to select "Exit" and press ENTER. Setup is complete. • When connecting to the network via a Proxy server, select "Proxy" and press ENTER (vpage 84 "Proxy settings"). • If you are using a broadband router (DHCP function), there is no need to make the settings at "IP Address" and "Proxy", since the DHCP function is set to "ON" in this unit's default settings. • If this unit is being used connected to a network without the DHCP function, the network settings must be made. In this case, some knowledge of networks is required. For details, consult a network administrator. • If you cannot connect to the Internet, recheck the connections and settings (vpage 22). • If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or the store from which you purchased your computer. • When you want to cancel the setting during IP address input, press RETURN. Proxy settings : Make this setting when connecting to the Internet via a proxy server. MANUAL SETUP NETWORK SETUP NETWORK CONNECTING MANUAL SETUP NETWORK SETUP NETWORK CONNECTING DHCP IP Address Exit Detail ON 192.168.100.19 q DHCP IP Address Subnet Mask Default gateway Primary DNS Secondary DNS Proxy Exit ON [192.168.100.019] [255.255.255.000] [000.000.000.000] [000.000.000.000] [000.000.000.000] w ENTER Enter Set IP address and proxy manually RETURN Return ENTER Enter Set if using proxy server RETURN Return e MANUAL SETUP NETWORK SETUP NETWORK CONNECTING Proxy Proxy Address Port Exit r y ON Address [000.000.000.000] [00000] u t Proxy server is used RETURN Return q On the menu, select "Network Connecting" - "Detail" and press ENTER. w Use ui to set "Proxy" and press ENTER. e Use o p to set "Proxy" to "ON" and press i. The proxy server is enabled. 84 Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu