Denon AVR-3311CI Owners Manual - English - Page 80

Simple version Basic version ENGLISH nnA-DSX Soundstage Adjust Audyssey DSX™ setting and sound stage parameters. Default settings are underlined. Setting items Audyssey DSX Provides more immersive surround sound by adding the new channels. Setting details ON-Height- : Turn on A-DSX processing for height expansion. ON-Wide- : Turn on A-DSX processing for wide expansion. OFF : Do not set Audyssey DSX. • This can also be set by pressing A-DSX on the remote control unit or press AUDYSSEY DSX on the main unit. • The indicator illuminates on the display. Stage Width Adjust sound stage width when using front wide speakers. Stage Height Adjust sound stage height when using front height speakers. -10 - +10 (0) Audyssey DSX : ON -Height- OFF Audyssey DSX : ON -Wide- -10 - +10 (0) • "Audyssey DSX" can be set when you are using front height speakers or front wide speakers. • "Audyssey DSX" is only valid when using a center speaker. • "Audyssey DSX" is valid when surround mode is STANDARD mode other than PLgz Height. • "A-DSX Soundstage" cannot be configured if the HD Audio source being played includes Front height and Front wide channels. In this case, the respective channels are played back using the input signals. About Audyssey Dynamic Surround Expansion (A-DSX) Audyssey DSX is a scalable surround expansion system that adds new channels to improve the surround impression. Based on research in human hearing Audyssey DSX adds a pair of Wide channels in the front because that information is critical in the rendering of a realistic soundstage. Audyssey DSX then adds a pair of Height channels above the main front channels to reproduce the next most important acoustical and perceptual cues related to soundstage depth. In addition to creating these new channels, Audyssey DSX applies Surround Envelopment Processing to enhance the blend between the front and side/back surround channels. The result is a much more seamless and enveloping home theater experience. Audio/Video Adjust nnManual EQ Default settings are underlined. Use the graphic equalizer to adjust the tone of each speaker. "Manual EQ" can be set when "MultEQ XT" setting (vpage 75) is "Manual" Setting items Setting details Adjust CH Correct the tone of each speaker. q Select the speaker tone adjustment method. All : Adjust the tone of all speakers together. L/R : Adjust the tone of left and right speakers together. Each : Adjust the tone of each speaker. w Select the speaker. e Select the adjustment frequency band. 63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz • Select the speakers you want to adjust when "L/R" or "Each" is selected. r Adjust the level. -20.0dB - +6.0dB (0.0dB) Base Curve Copy Yes : Copy. Copy "Audyssey Flat" curve No : Do not copy. from MultEQ® XT. "Base Curve Copy" is displayed after Audyssey® Auto Setup has been performed. Default The "Manual EQ" settings are returned to the default settings. Yes : Reset to the defaults. No : Do not reset to the defaults. Advanced version Information Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu 77