Epson EPL-N2000 User Manual - Network Administration - Page 13

Connecting the Ethernet Interface Card to the Network, User's Guide

Get Epson EPL-N2000 PDF manuals and user guides View all Epson EPL-N2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

This chapter explains how to connect the Ethernet interface card to the network, as well as how to perform such basic tasks as reading the card's lights, using the card to print a status sheet, and resetting the card. Connecting the Ethernet Interface Card to the Network Your EPL-N2000 comes with a preinstalled Ethernet interface card that you can connect to your network using either a 10BASE-T or 10BASE2 network cable. (Your printer includes a coaxial Y-connector for a 10BASE2 connection.) Follow these steps to connect the card to your network: 1. Make sure the Interface setting in the SelecType Setup Menu is set to Auto, then turn off the printer. Note: This setting ensures that the card automatically switches mode to match the network interface used. See Chapter 3 in the User's Guide for information on SelecType settings. 1-2 Getting Started

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
1-2
Getting Started
This chapter explains how to connect the Ethernet interface card
to the network, as well as how to perform such basic tasks as
reading the card’s lights, using the card to print a status sheet,
and resetting the card.
Connecting the Ethernet Interface Card to the
Network
Your EPL-N2000 comes with a preinstalled Ethernet interface
card that you can connect to your network using either a
10BASE-T or 10BASE2 network cable. (Your printer includes a
coaxial Y-connector for a 10BASE2 connection.)
Follow these steps to connect the card to your network:
1.
Make sure the Interface setting in the SelecType Setup Menu
is set to
Auto
, then turn off the printer.
Note:
This setting ensures that the card automatically switches mode to
match the network interface used. See Chapter 3 in the
User’s Guide
for information on SelecType settings.