Epson EPL-N2000 User Manual - Network Administration - Page 19
Net! for NetWare Windows, and EPSON Net! for NetWare DOS.
View all Epson EPL-N2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
This chapter describes how to configure the EPL-N2000 as a print server or remote printer running under Novell NetWare. The EPL-N2000 comes with EPSON Net! for NetWare, EPSON's proprietary NetWare printer management utility. You can use EPSON Net! for NetWare to add or delete queues, change port configurations, rename the print server, configure the interface to service queues on other file servers, and other tasks. There are two versions of EPSON Net! for NetWare: EPSON Net! for NetWare Windows, and EPSON Net! for NetWare DOS. Before you begin, do the following: t Log on the network with supervisor privileges. t Decide whether you want to configure the EPL-N2000 as a dedicated print server or remote printer, or whether you want to switch automatically between these two modes. t Make sure the EPL-N2000 is connected to the network and turned on. See Chapter 1 for information on connecting the Ethernet interface card. t Make sure that Novell NetWare is set up to use print services on the network. See your Novell NetWare documentation for details about setup. c Caution: Once you make changes to the EPL-N2000, you must wait at least five minutes before turning off or rebooting your printer. 2-2 Configuring the EPL-N2000 for NetWare