Epson EPL-N2000 User Manual - Network Administration - Page 43
Using EPSON Zoner to Assign a Zone to Your Printer, AppleTalk Phase II network
View all Epson EPL-N2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
8. Click Done to exit EPSON Namer. If you should ever want to return the EPL-N2000 to its default name, click Reset. Using EPSON Zoner to Assign a Zone to Your Printer Follow these steps to assign a zone to the EPL-N2000 on an AppleTalk Phase II network: 1. Double-click on EPSON Zoner to start the utility. After searching your network, EPSON Zoner displays the following screen: 2. Select your printer name in the Printers list. 3. In the Zones list, select the zone that you want to assign to your printer. Note: The default zone appears as an asterisk (*). 4. Set the AppleTalk PS option to Inactive. 5. Click Set. Configuring the EPL-N2000 for AppleTalk 3-7
Configuring the EPL-N2000 for AppleTalk
3-7
8.
Click
Done
to exit EPSON Namer.
If you should ever want to return the EPL-N2000 to its
default name, click
Reset.
Using EPSON Zoner to Assign a Zone to Your Printer
Follow these steps to assign a zone to the EPL-N2000 on an
AppleTalk Phase II network:
1.
Double-click on
EPSON Zoner
to start the utility. After
searching your network, EPSON Zoner displays the
following screen:
2.
Select your printer name in the Printers list.
3.
In the Zones list, select the zone that you want to assign to
your printer.
Note:
The default zone appears as an asterisk (*).
4.
Set the AppleTalk PS option to
Inactive
.
5.
Click
Set
.