Epson EPL-N2000 User Manual - Network Administration - Page 15

PostScript initialization has not been completed.

Get Epson EPL-N2000 PDF manuals and user guides View all Epson EPL-N2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

The status sheet provides information you need to configure your printer for the network, such as the IP address for the Ethernet interface card, and the printer's serial number and current configuration. If the printer fails to print a status sheet, make sure that the printer is online and that no jobs are processing, then wait one minute before pressing the status sheet button again. If it still does not print a status sheet, turn the printer off. Wait at least five seconds before turning it on, then press the status sheet button again. Note: If your printer has an EPSONScript Level 2 module installed, allow a minute for the printer to initialize before trying to configure it on the network. The EPL-N2000 may not configure properly if PostScript initialization has not been completed. 1-4 Getting Started

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
1-4
Getting Started
The status sheet provides information you need to configure
your printer for the network, such as the IP address for the
Ethernet interface card, and the printer’s serial number and
current configuration.
If the printer fails to print a status sheet, make sure that the
printer is online and that no jobs are processing, then wait one
minute before pressing the status sheet button again.
If it still
does not print a status sheet, turn the printer off. Wait at least
five seconds before turning it on, then press the status sheet
button again.
Note:
If your printer has an EPSONScript Level 2 module installed, allow
a minute for the printer to initialize before trying to configure it on
the network. The EPL-N2000 may not configure properly if
PostScript initialization has not been completed.