Epson EPL-N2000 User Manual - Network Administration - Page 77
Epnet\remprt @ Remprt3.ini
View all Epson EPL-N2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
4. Create an initialization file in the remote print service directory. t If your network protocol is TCP/IP, the format of the file is as follows: REMPRT t If your network protocol is NetBEUI, the format is as follows: REMPRT3 Note: The remote print service uses this file at startup to assign the printer to the workstations' portnames. The file identifies the shared EPL-N2000 printer by the serial number of its Ethernet card, and each workstation by the portnames assigned in steps 2 and 3. For example, if the printer's Ethernet card has the serial number 10900416, and the printer is shared by three workstations, the initialization file might contain the following: REMPRT 100900416 PORTA PORTB PORTC 5. Edit STARTUP.CMD in your workstation's root directory to include the REMPRT command and the initialization file as the last line. t If your network protocol is TCP/IP, type the following: \EPNET\REMPRT @ REMPRT.INI t If your network protocol is NetBEUI, type the following: \EPNET\REMPRT @ REMPRT3.INI Configuring the EPL-N2000 for OS/2 6-11