Epson EPL-N2000 User Manual - Network Administration - Page 68
Protocol Support, Configuring the EPL-N2000 for OS/2, OS/2 Warp Connect must be installed with TCP/IP
View all Epson EPL-N2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
This chapter explains how to use EPSON Net! for OS/2 to set up your Microsoft LANManager or IBM LANServer workstation to send print files to the EPL-N2000 through either redirection or piping. It also explains how to use piping to set up two or more OS/2 workstations to share an EPL-N2000 printer. Before you begin, do the following: t Make sure the EPL-N2000 is connected to the network and turned on. See Chapter 1 for information on connecting the Ethernet interface card. t Make sure you have supervisor privileges for the OS/2 workstation on which you set up redirection or piping. Protocol Support The EPL-N2000 supports both NetBIOS over TCP/IP and NetBEUI. EPSON Net! for OS/2 provides the following programs for these protocols: NETBEUI RPRINT3, RSTAT3-LPT redirection REMPRT3, REMBEU, REMDRV3, REMSTAT3-pipe support TCP/IP RPRINT, RSTAT-LPT redirection REMPRT, REMDRV, REMSTAT-pipe support Note: OS/2 Warp Connect must be installed with TCP/IP, and OS/2 Warp and Warp Connect must be installed with NetBEUI. 6-2 Configuring the EPL-N2000 for OS/2