Epson EPL-N2000 User Manual - Network Administration - Page 72
Copying the Piping Software
View all Epson EPL-N2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Copying the Piping Software Follow these steps to create a remote print service directory and copy the EPL-N2000 piping software: 1. If you're unsure of the printer's serial number, print a network adapter status sheet. See Chapter 1 for details. 2. Insert the diskette labeled EPSON Net! for NetWare DOS and OS/2 in your workstation's diskette drive. 3. Open an OS/2 full screen command session. 4. To create a remote print service directory, type the following at the OS/2 command line: MD C:\EPNET 5. Open the OS/2 directory on drive A (or B) and go to the PIPES directory for your network protocol. t If your protocol is TCP/IP, type CD TCPIP\PIPE and press the Enter key. t If your protocol is NetBEUI, type CD NETBEUI\PIPE and press the Enter key. 6. Copy all files in the PIPES directory to the remote print service directory: t If your protocol is TCP/IP, type the following: COPY A:\TCPIP\PIPE\*.* C:\EPNET t If your protocol is NetBEUI, type the following: COPY A:\NETBEUI\PIPE\*.* C:\EPNET 6-6 Configuring the EPL-N2000 for OS/2