Gateway 9315 Gateway 9315 Server User Guide - Page 104
Place the jumper back onto pins 2-3., Remove the jumper across pins 2-3 of jumper J1H2 Pass Clr
View all Gateway 9315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Caution Moving the jumper while the power is on can damage your server. Always turn off the server and unplug the power cords and all other cables before changing the jumper. 3 Remove the jumper across pins 2-3 of jumper J1H2 (Pass Clr), then place the jumper across pins 1-2. 4 Reconnect the power cords and turn on the server. The BIOS password(s) is cleared. 5 Turn off the server, then disconnect the power cords and all other cables connected to the server. 6 Place the jumper back onto pins 2-3. 7 Follow the instructions in "Closing the server case" on page 39. www.gateway.com 99
99
www.gateway.com
3
Remove the jumper across pins 2-3 of jumper J1H2 (Pass Clr), then place the jumper
across pins 1-2.
4
Reconnect the power cords and turn on the server. The BIOS password(s) is cleared.
5
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
6
Place the jumper back onto pins 2-3.
7
Follow the instructions in
“Closing the server case” on page 39
.
Caution
Moving the jumper while the power is on can damage your server.
Always turn off the server and unplug the power cords and all other
cables before changing the jumper.