Gateway 9315 Gateway 9315 Server User Guide - Page 74
Removing and Installing PCI expansion cards, Removing and installing the PCI riser assembly
View all Gateway 9315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Removing and Installing PCI expansion cards Caution The PCI riser assembly and individual PCI expansion cards are not hot-swappable. Before installing or removing the any part of the assembly, make sure that power is turned off and the power cord is unplugged. Removing and installing the PCI riser assembly To remove and install the PCI riser assembly: 1 Follow the instructions in "Preventing static electricity discharge" on page 37. Make sure that you turn off the server, then unplug the power cord and all other cables connected to the server. 2 Follow the instructions in "Opening the server case" on page 38. 3 If necessary, disconnect any cables that are attached to installed PCI expansion cards. 4 Lift the PCI riser assembly from the system board by lifting the two, blue latches on the assembly. www.gateway.com 69