Gateway 9315 Gateway 9315 Server User Guide - Page 72
To install or replace memory, replacing a memory module, lift the old module out of the slot.
View all Gateway 9315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
maintained as a spare, only 75% of the installed memory is usable. For example, if six 2 GB DIMMs are installed, only four are actively used (the other two are used as spares), so the maximum usable memory for this configuration would be 8 GB. A DIMM fault LED adjacent to the DIMM slot will light orange to indicate the failed memory module. To install or replace memory: 1 Follow the instructions in "Preventing static electricity discharge" on page 37. Make sure that you turn off the server, then unplug the power cord and all other cables connected to the server. 2 Follow the instructions in "Opening the server case" on page 38. 3 Pull the plastic tabs away from the sides of the memory module slot. If you are replacing a memory module, lift the old module out of the slot. DIMM 2A DIMM 3B DIMM 3A DIMM 2B DIMM 1A DIMM 1B 4 Align the notch on the new module with the notch in the memory module slot and press the module firmly into the slot. The tabs on the sides of the memory slot should secure the memory module automatically. 5 Follow the instructions in "Closing the server case" on page 39. www.gateway.com 67