Gateway 9315 Gateway 9315 Server User Guide - Page 49
Installing the air baffle
View all Gateway 9315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Installing the air baffle Caution To ensure continued, reliable operation, always operate your server with the appropriate air ducts, air dams, and baffle in place. Failure to do this could result in equipment damage. To install the air baffle: 1 Place the air baffle into the chassis between the power supply and the hot-swap drive backplane, routing the cables as noted in the removal process. 2 Fit the tab that extends from the front of the baffle under the drive bay area. 3 Line up the guide pins on the baffle with the matching holes in the chassis and in the backplane. 4 Push down firmly on the air baffle to secure it to the chassis. Caution Make sure that you do not pinch any cables under the baffle as you are reinstalling it. Failure to do this could result in misalignment of the baffle and incorrect airflow in the server. 5 Follow the instructions in "Closing the server case" on page 39. 44 www.gateway.com