Gateway 9315 Gateway 9315 Server User Guide - Page 91
Replacing the control panel
View all Gateway 9315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Replacing the control panel Caution The control panel is not hot-swappable. Before installing or removing the control panel, make sure that power is turned off and the power cord is unplugged. To replace the control panel: 1 Follow the instructions in "Preventing static electricity discharge" on page 37. Make sure that you turn off the server, then unplug the power cord and all other cables connected to the server. 2 Unlock the bezel, then remove it by pulling it straight off the server. 3 Follow the instructions in "Opening the server case" on page 38. 4 Press the blue latch at the back of the control panel, then slide the control panel forward far enough to reach the front panel and USB cable connectors at the back of the panel. Tips & Tricks You may need to disconnect the ends of the front panel and USB cables from the system board or backplane to create enough slack in the cables to reach the connectors. 5 Disconnect the cables from the control panel. 86 www.gateway.com