Gateway 9315 Gateway 9315 Server User Guide - Page 94
the case until the holes in the board line up with the threaded standoffs on the case.
View all Gateway 9315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
9 Slide the system board toward the front of the server. If the board is difficult to move, push on the back I/O port panel for added leverage. 10 Lift the board away from the case. 11 Insert the new system board into the case, then slide the board toward the back of the case until the holes in the board line up with the threaded standoffs on the case. 12 Replace the 9 system board screws you removed in Step 8. www.gateway.com 89
89
www.gateway.com
9
Slide the system board toward the front of the server. If the board is difficult to move,
push on the back I/O port panel for added leverage.
10
Lift the board away from the case.
11
Insert the new system board into the case, then slide the board toward the back of
the case until the holes in the board line up with the threaded standoffs on the case.
12
Replace the 9 system board screws you removed in
Step 8
.