Gateway 9315 Gateway 9315 Server User Guide - Page 82
If you are installing a processor, proceed
View all Gateway 9315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
5 If you are installing a processor, proceed to Step 7. - OR - If you are replacing a processor, loosen the four captive screws on the corners of the heat sink, then twist the heat sink slightly to break the seal between the heat sink and remove it from the processor. Caution Do not force the heat sink from the processor. Doing so could damage the processor. 6 Rotate the processor release lever a full 135° to release the processor, then lift the processor out of the socket. www.gateway.com 77
77
www.gateway.com
5
If you are installing a processor, proceed to
Step 7
.
- OR -
If you are replacing a processor, loosen the four captive screws on the corners of the
heat sink, then twist the heat sink slightly to break the seal between the heat sink
and remove it from the processor.
6
Rotate the processor release lever a full 135° to release the processor, then lift the
processor out of the socket.
Caution
Do not force the heat sink from the processor. Doing so could damage
the processor.