GE 21098GE3 User Guide - Page 67
Handset Sound Signals, Troubleshooting Guide - a battery
UPC - 044319401028
View all GE 21098GE3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
PRESS TALK KEY CHARGING............ Indicates CID number is Direct Dial Number (DDN) and cannot be formatted. This occurs when the handset is placed on the cradle after the battery is inserted. The handset needs to be fully charged before it can function properly Handset Sound Signals Signal Meaning A long warbling tone (with ringer on) Signals an incoming call Three short beeps Page signal One long beep Confirmation tone for the completion of a function One short beep (every 7 seconds) Low battery warning One short beep (during room monitoring) Ring alert tone Troubleshooting Guide Telephone Solutions No dial tone • Check or repeat installation steps: Make sure the base power cord is connected to a working electrical outlet. Make sure the telephone line cord is connected to the base and the wall jack. • Connect another phone to the same jack. If it doesn't work, the problem might be your wiring or local service. • The handset may be out of range of the base. Move closer to the base. • Make sure the battery is properly charged (for 16 hours). • Make sure the battery pack (in the handset) is properly installed. 67