GE 21098GE3 User Guide - Page 68
Charge the battery for 16 hours.
UPC - 044319401028
View all GE 21098GE3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
• The handset should beep when you press the TALK/END/call back button, and the charge indicator on the base should be lit when the handset rests in the cradle. If not, the battery may need to be charged. • Place handset in charge cradle for at least 20 seconds to reset the unit. Handset does not ring • Make sure the handset ringer is set to on, this can be done through the handset setup menu - Ringer Volume. • The handset may be out of range of the base. Move closer to the base. • You may have enabled Do Not Disturb (DND). Make sure the DND is off. • You may have too many extension phones on your line. Try unplugging some extension phones. • Check for a dial tone. You experience static, noise, or fading in and out • The handset may be out of range of the base. Move closer to base. • Make sure base is not plugged into an electrical outlet with another household appliance. If necessary, relocate the base. • Charge the battery (for 16 hours). Unit beeps • Clean the charging contacts on the cordless handset. • See solutions for "No dial tone" on previous page. • Replace the battery. Memory dialing doesn't work • Did you program the memory location keys correctly? • Did you follow proper dialing sequence? Unit locks up and no communication between the base and cordless handset 68