GE 60-806-95R-16Z Installation Instructions - Page 48
Entering User Programming Mode
UPC - 046188090938
View all GE 60-806-95R-16Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
3. Press ƒ. The panel exits program mode and the touchpad displays TIME AND DATE. Entering User Programming Mode The user programming mode lets you program or view the following system settings: • Time and Date • User Codes • Options • View System Version Information You can enter user programming from an alphanumeric or fixed display touchpad, using the system master code. The system master code default is 1234. ¾ To enter user-programming mode: Press 9 + CODE. The display shows TIME AND DATE. Press Time and Date Menu The TIME AND DATE menu lets you set the panel clock and calendar. Alphanumeric touchpads display the time and date whenever the system is disarmed. Setting the time and date is important for accurate tracking of system events stored in the event buffer. The panel uses a global clock and calendar for time and date. The following describes how to set the panel time and date. Time (00) Time and Date (Default=00:00) This setting lets you adjust the panel clock to the correct time. The panel uses a 24-hour clock, eliminating the need to designate A.M. or P.M. For example, to set the time to 4:17 P.M., enter 1617. ¾ To set the Time: 1. With the display showing TIME AND DATE, press ƒ and the display shows TIME hh:mm AM/PM (current time). 2. Enter the correct time (0000 - 2359). The display flashes the entered time. Press ƒ and the display shows the new time. Date (01) This setting lets you adjust the panel calendar to the correct month, day, and year. Time and Date (Default=01/01/00) ¾ To set the Date: 1. With the display showing TIME AND DATE, press ƒ then B and the display shows DATE nn/nn/nn (current date). 2. Enter the correct month (01 - 12), day (01 - 31), and year (00 - 99). For example, enter 090100 for September 1, 2000. The display flashes the entered date. Press ƒ and the display shows the new date. User Codes Menu Important ! Each security access code (Installer, Dealer, System Master, or User) must be unique. Do not use the same combination of numbers for any two codes. The USER CODES menu lets you program/change regular user access codes and the system master code. 43 Programming the Panel