GE 60-806-95R-16Z Installation Instructions - Page 50

System Master Code (110) User Codes (Default=1234) The System Master Code performs ¾ To change the System Master Code: all system operations and user pro- 1. With the display showing USER CODES, press ƒ then B. The display shows SYSTEM MAS- gramming. TER CODE. 2. Press ƒ and the display shows SYSTEM MASTER nnnn (current code). 3. Enter a new 4-digit code. The display flashes the entered code. Press ƒ and the display shows the new code. Options Menu The OPTIONS menu lets you set up the system for downloading and silent arming, and lets you adjust alphanumeric touchpad display brightness. Downloading (20) Options (Default=on) This setting determines whether or not the panel can communicate with ToolBox software for programming the system from off-site. Note The panel must have a Downloader phone number and Downloader code programmed and be connected to a phone line for this feature to work. ¾ To turn Downloading off or on: 1. Enter user programming with the system master code. The display shows TIME AND DATE. 2. Press A or B until the display shows OPTIONS. 3. Press ƒ and the display shows DOWNLOADING OFF/ON (current setting). 4. Press 1 (off) or 2 (on). The display flashes the entered selection. Press ƒ and the display shows the new setting. Silent Arming (21) Options (Default=off) This setting determines whether the partition arms the system with (off) or without (on) sounding status beeps from sirens and the touchpad. Note Turning this feature on will double the exit time. This option is not available when SIA False Alarm Reduction (0003) is on. ¾ To turn Silent Arming off or on: 1. Enter user programming mode with the system master code. The display shows TIME AND DATE. 2. Press A or B until the display shows OPTIONS. 3. Press ƒ, then B and the display shows SILENT ARMING OFF/ON (current setting). 4. Press 1 (off) or 2 (on). The display flashes the entered selection. Press ƒ and the display shows the new setting. Touchpad Brightness (22) Options (Default=2) This setting lightens or darkens the background on touchpad displays. Each touchpad display can be set independently to compensate for lighting conditions in the touchpad location. ¾ To adjust Touchpad Brightness: 1. Enter user programming mode with the system master code. The display shows TIME AND DATE. 2. Press A or B until the display shows OPTIONS. 3. Press ƒ, then B twice and the display shows TOUCHPAD BRIGHTNESS n (current setting). 4. Enter a setting from 0 (darkest background) to 3 (brightest background). The display flashes the entered selection. Press ƒ and the display shows the new setting. 45 Programming the Panel