HP 6125G HP 6125G & 6125G/XG Blade Switches IRF Configuration Guide-R2 - Page 20

Command, Remarks, master and then the switch that has

Get HP 6125G PDF manuals and user guides View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Step 2. Enter Ethernet interface view or interface range view. Command • Enter interface range view: { Approach 1: interface range { interface-type interface-number [ to interface-type interface-number ] } & { Approach 2: interface range name name [ interface { interface-type interface-number [ to interface-type interface-number ] } & ] • Enter interface view: interface interface-type interface-number Remarks To shut down a range of physical IRF ports, enter interface range view. To shut down one physical IRF port, enter its interface view. 3. Shut down the port or ports. shutdown Always shut down a physical port before binding it to an IRF port or removing the binding. Start the shutdown operation on the master and then the switch that has the fewest number of hops from the master. 4. Return to system view. quit N/A 5. Enter IRF port view. irf-port member-id/port-number N/A 6. Bind each physical port to the IRF port. port group interface interface-type interface-number [ mode { enhanced | normal } ] By default, no physical port is bound to any IRF port. Make sure the two ends of an IRF link use the same binding mode. 7. Return to system view. quit N/A 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
16
Step
Command
Remarks
2.
Enter Ethernet interface view
or interface range view.
•
Enter interface range view:
{
Approach 1:
interface range
{
interface-type
interface-number
[
to
interface-type
interface-number
] }
&<1-5>
{
Approach 2:
interface range
name
name
[
interface
{ int
erface-type
interface-number
[
to
interface-type
interface-number
] }
&<1-5> ]
•
Enter interface view:
interface
interface-type
interface-number
To shut down a range of physical IRF
ports, enter interface range view.
To shut down one physical IRF port,
enter its interface view.
3.
Shut down the port or ports.
shutdown
Always shut down a physical port
before binding it to an IRF port or
removing the binding.
Start the shutdown operation on the
master and then the switch that has
the fewest number of hops from the
master.
4.
Return to system view.
quit
N/A
5.
Enter IRF port view.
irf-port
member-id
/
port-number
N/A
6.
Bind each physical port to
the IRF port.
port group interface
interface-type
interface-number
[
mode
{
enhanced
|
normal
} ]
By default, no physical port is bound
to any IRF port.
Make sure the two ends of an IRF link
use the same binding mode.
7.
Return to system view.
quit
N/A